From The Anvil 64mm (2 1/2 Inch) Tubular Latches

2 1/2 Inch Tubular Mortice Latches for Lever Handles

The 2 1/2 inch, or 64mm, tubular latch is the smaller of the two sizes From The Anvil recommends for lever handles. It has a 44mm to 45mm backset, measured from the door edge to the centre of the spindle.

Choose the standard tubular latch for sprung lever handles, or the heavy duty latch for unsprung levers.

64mm (2 1/2 Inch) Tubular Latches in This Collection

• Standard tubular latches in Aged, Polished and Satin Brass, Aged and Polished Bronze, Polished and Satin Chrome, Polished Nickel and Pewter Patina
• Heavy duty latches in Black, PVD Brass and Satin Stainless Steel
• For a longer backset, see the 76mm tubular latches
• Shop by finish: black, brass, bronze, chrome and stainless steel tubular latches

64mm (2 1/2 Inch) Tubular Latches: Questions

Which size latch do I need?

From The Anvil recommends a 2 1/2" or 3" latch with lever handles, and a 3", 4" or 5" latch with knob sets. If you are replacing a latch, measure the backset (from the door edge to the centre of the spindle hole) and match it: about 45mm for 2 1/2", 57mm for 3", 82mm for 4" and 107mm for 5".

Standard or heavy duty latch?

The standard tubular latch is for From The Anvil sprung lever handles. The heavy duty latch has an extra strong spring for knob sets and unsprung lever handles, so heavier handles always return to position.

Trade Door Handles is part of T.H. Wiggans Ironmongery, an independent architectural ironmonger trading since 1976. We have supplied From The Anvil for decades, and both our T.H. Wiggans showroom in Kendal and our Trade Door Handles showroom in Carlisle have From The Anvil displays, so you can see the finishes before you order. Visit our showrooms or contact our team for help choosing.