From The Anvil Door Handles and Knobs

Lever Handles, Door Knobs and Pull Handles by From The Anvil

Shop the full range of From The Anvil door handles and knobs, from hand-forged black and pewter levers for cottage doors to solid brass Period designs in aged brass, polished nickel and bronze. Every design is made to match across the house, so the same handle can follow you from the front door to the bathroom, the windows and the kitchen.

Shop by Handle Type

Shop by Design

Each From The Anvil design runs across several product types. Avon is the signature lever, hand-hammered by From The Anvil blacksmiths. Brompton has a knurled diamond pattern. Newbury is slim and elegant, and Hammered Newbury adds a hand-hammered surface. Hinton and Reeded are solid brass Period designs, Regency is smooth and simple, and Monkeytail is forged from mild steel with a curled tail.

Shop by Finish

Blacksmith finishes include black, pewter patina, beeswax and external beeswax. Period finishes include aged brass, polished nickel, polished chrome, aged bronze and polished bronze. For coastal homes choose satin or polished marine grade 316 stainless steel.

From The Anvil Door Handles: Your Questions Answered

What is the difference between lever handles on rose and on backplate?

Lever handles on rose have a small round or square rose, so you add a separate escutcheon or bathroom thumbturn to suit the lock behind. Lever handles on backplate have the keyhole or thumbturn built into one plate, and come in lock, latch, euro lock and bathroom versions.

Which From The Anvil finishes can I use on an external door?

From The Anvil recommends Black and Pewter Patina for damp conditions outside, and External Beeswax is dipped in an anti-corrosive beeswax for inside and outside use. If you like the Beeswax look on an outside door, choose the External Beeswax version. Near the coast, choose marine grade 316 stainless steel, which From The Anvil has salt tested for over 1,000 hours.

Will From The Anvil multipoint handles fit my uPVC or composite door?

Most From The Anvil multipoint lock handles have 92mm centres between the spindle and the keyhole and 212mm fixing centres, which suit many uPVC and composite doors. Measure your existing handle and check the dimensions on the product page before you order.

Can I match From The Anvil door handles to window and cabinet hardware?

Yes. Ranges such as Avon, Newbury, Hinton, Reeded and Monkeytail include matching casement stays, fasteners and espagnolette handles, and Brompton and Regency also include cabinet knobs and pull handles in the same finishes.

Can I see From The Anvil door handles before I buy?

Yes. T.H. Wiggans Ironmongery has supplied From The Anvil for decades, and both our T.H. Wiggans showroom in Kendal and our Trade Door Handles showroom in Carlisle have From The Anvil displays where you can handle the designs and finishes before you order.

Trusted UK Ironmongery Supplier Since 1976

Trade Door Handles is part of T.H. Wiggans Ironmongery, an independent architectural ironmonger trading since 1976, with showrooms in Kendal and Carlisle. We supply joiners, builders and homeowners with door, window and cabinet hardware, and have supplied From The Anvil for decades. Call or email us for help choosing handles, or browse the full From The Anvil ironmongery range.

Shop by Type

Shop by Lock, Latch and Rose Type

Shop by Design
View as

Shop by Finish

Buying Guide

How to Choose the Right From The Anvil Door Handle

Choosing door handles starts with the door and the lock or latch fitted inside it. Get that right first, and every From The Anvil lever, knob and pull in the same design and finish will sit together from room to room.

Internal doors with a tubular latch: choose lever handles on rose, on a round rose or a square rose, or latch door handles on backplate.

Doors with a sash lock or deadlock: choose lock door handles on backplate for a standard key, euro lock door handles for a euro cylinder, or a lever on rose with a matching escutcheon.

Bathrooms and en-suites: choose bathroom door handles on backplate with the turn built in, or a lever on rose with a separate bathroom thumbturn.

Front and back doors with a multipoint lock: choose multipoint door handles. Most From The Anvil multipoint lock handles have 92mm centres and 212mm fixing centres, but measure your old handle before you order.

Cottage, barn and ledged and braced doors: Suffolk, thumb and ring latches keep the traditional look, while mortice and rim knobs suit period panel doors and rim locks.

Sliding, pocket and entrance doors: flush pulls sit flat in the door so it can slide past the frame, and door pull handles come in bolt through and face fix versions for heavier doors.

Shop Multipoint Door Handles

Trusted Since 1976

See and Handle From The Anvil in Kendal and Carlisle

Trade Door Handles is the online shop of T.H. Wiggans Ironmongery, an independent architectural ironmonger trading since 1976. For five decades we have supplied joiners, builders and homeowners with door, window and cabinet hardware, and we have stocked From The Anvil for decades.

Our T.H. Wiggans showroom in Kendal and our Trade Door Handles showroom in Carlisle both have From The Anvil display stands alongside a large display of door, window and cabinet hardware. Holding a handle in your hand shows you the weight of the solid brass Period designs and the hand-hammered texture of the Blacksmith finishes, such as black, pewter patina and beeswax, far better than a photo can.

Our team can help you plan a whole project in one design and finish: door handles, matching From The Anvil window furniture, cabinet hardware, hinges and locks and latches, so everything matches from the front door to the kitchen. We can also check your lock and latch types, door thickness and fixing centres before you order.

Trade and retail customers are equally welcome. Visit our showrooms, or contact us with photos of your doors and we will help you choose.

Find Our Showrooms

From The Anvil Door Handles and Knobs FAQs

What is the difference between lever handles on rose and on backplate?

Lever handles on rose have a small round or square rose, so you add a separate escutcheon or bathroom thumbturn to suit the lock behind. Lever handles on backplate have the keyhole or thumbturn built into one plate, and come in lock, latch, euro lock and bathroom versions.

Which From The Anvil finishes can I use on an external door?

From The Anvil recommends Black and Pewter Patina for damp conditions outside, and External Beeswax is dipped in an anti-corrosive beeswax for inside and outside use. If you like the Beeswax look on an outside door, choose the External Beeswax version. Near the coast, choose marine grade 316 stainless steel, which From The Anvil has salt tested for over 1,000 hours.

Will From The Anvil multipoint handles fit my uPVC or composite door?

Most From The Anvil multipoint lock handles have 92mm centres between the spindle and the keyhole and 212mm fixing centres, which suit many uPVC and composite doors. Measure your existing handle and check the dimensions on the product page before you order.

Can I match From The Anvil door handles to window and cabinet hardware?

Yes. Ranges such as Avon, Newbury, Hinton, Reeded and Monkeytail include matching casement stays, fasteners and espagnolette handles, and Brompton and Regency also include cabinet knobs and pull handles in the same finishes.

Can I see From The Anvil door handles before I buy?

Yes. T.H. Wiggans Ironmongery has supplied From The Anvil for decades, and both our T.H. Wiggans showroom in Kendal and our Trade Door Handles showroom in Carlisle have From The Anvil displays where you can handle the designs and finishes before you order.
Back to top

Compare /3
Call Us