Alexander and Wilks Door Flush Pulls

Alexander & Wilks Sliding and Pocket Door Hardware

Alexander & Wilks sliding door hardware lets pocket and sliding doors open, close and lock without a projecting handle. Flush pulls sit level with the door face so the door can slide fully into the wall, edge pulls draw it back out, and sliding door lock sets add privacy for bathrooms and bedrooms.

The range comes in seven finishes - Antique Brass, Satin Brass PVD, Dark Bronze PVD, Black, Satin Nickel, Satin Chrome and Polished Chrome - so it can match Alexander & Wilks lever handles elsewhere in the house. Alexander & Wilks says all its products carry a 10 year mechanical guarantee, and PVD finishes carry a 25 year finish guarantee.

Shop by Type

Shop by Finish

Shop in Antique Brass, Satin Brass, Dark Bronze, Black, Satin Nickel, Satin Chrome or Polished Chrome.

Complete the Job

Match the rest of the house with Alexander & Wilks door handles and knobs and Alexander & Wilks door furniture accessories. For pocket door gear and other brands, see our pocket door hardware, pocket door flush pulls, pocket door edge pulls and pocket door locks.

Alexander & Wilks Sliding Door Hardware: Your Questions Answered

What do I need for an Alexander & Wilks pocket door?

Most pocket doors need a flush pull on each face, so the door can slide fully into the wall, plus an edge pull on the leading edge to draw it back out. For bathrooms and bedrooms, choose a sliding door lock set.

What door thickness do the sliding door lock sets suit?

Alexander & Wilks says its round rose and square rose sliding door lock sets are suitable for doors 35mm to 45mm thick.

What sizes are the Alexander & Wilks flush pulls?

Alexander & Wilks gives the rectangular flush pull (AW911-100) as 100 x 45mm with a 14mm projection, and the round sliding door pull kit (AW994) as 60mm long and 48mm in diameter with an 11mm projection.

What is the difference between an edge pull and a finger edge pull?

The square and radius edge pulls are 70mm high plates set into the door edge. The round and square finger edge pulls are smaller pulls, around 25mm to 30mm long, that you grip with a fingertip.

Can I see Alexander & Wilks sliding door hardware before I buy?

Yes. Trade Door Handles is part of T.H. Wiggans Ironmongery, and our showrooms in Kendal and Carlisle are probably the largest architectural ironmongery showrooms in the North West of England. We have over 900 door handles on display in Kendal and over 300 in Carlisle, alongside window fittings and cabinet hardware, plus over 40 internal doors in Kendal and over 10 in Carlisle. We have supplied Carlisle Brass hardware since the 1980s. Find our showrooms or contact our team for help.

Can you supply the full Alexander & Wilks range?

Yes. We keep a selection of Alexander & Wilks products in stock, and our Carlisle showroom, trade counter and distribution centre is a five minute drive from where Alexander & Wilks products are stored, giving us direct access to the full range. For contract projects we work closely with the Alexander & Wilks team at Carlisle Brass, and our location means we can contact them directly and see them regularly. Send us your project schedule and we will check availability for you.

Independent Ironmonger Since 1976

Trade Door Handles is part of T.H. Wiggans Ironmongery, an independent architectural ironmonger trading since 1976, with showrooms in Kendal and Carlisle. We have supplied Carlisle Brass hardware since the 1980s, and our Carlisle showroom is a five minute drive from Carlisle Brass, giving us same day access to the full Alexander & Wilks range. Visit our showrooms, contact our team for help choosing, or browse the full Alexander & Wilks range.

View as

Pocket door buying guide

What You Need for an Alexander & Wilks Pocket Door

A pocket door slides into the wall, so it needs hardware that sits flush. Fit a recessed pull on each face - either a round or square sliding door pull kit or a rectangular flush pull - so the door can disappear fully into the pocket.

Then add a pull to the leading edge so you can draw the door back out. Choose a 70mm square or radius sliding door edge pull, or a compact round or square finger edge pull.

For a bathroom, en suite or bedroom, use a round rose or square rose sliding door lock set - Alexander & Wilks says these suit doors 35mm to 45mm thick. Every piece comes in seven finishes, from Antique Brass and Satin Brass PVD to Black, and PVD finishes carry a 25 year finish guarantee.

See them before you buy

Alexander & Wilks Specialists in Kendal and Carlisle

Trade Door Handles is part of T.H. Wiggans Ironmongery, an independent architectural ironmonger trading since 1976. Our showrooms in Kendal and Carlisle have over 40 internal doors on display in Kendal and over 10 in Carlisle, so you can see how door hardware looks on a real door before you order.

Our Carlisle showroom, trade counter and distribution centre is a five minute drive from where Alexander & Wilks products are stored, giving us direct access to the full Alexander & Wilks range. Match your pocket doors to Alexander & Wilks door handles and knobs on the rest of the house.

Need the gear itself, or other brands? See our full pocket door hardware range, including pocket door locks and pocket door flush pulls.

Alexander & Wilks Sliding Door Hardware: Your Questions Answered

What do I need for an Alexander & Wilks pocket door?

Most pocket doors need a flush pull on each face, so the door can slide fully into the wall, plus an edge pull on the leading edge to draw it back out. For bathrooms and bedrooms, choose a sliding door lock set.

What door thickness do the sliding door lock sets suit?

Alexander & Wilks says its round rose and square rose sliding door lock sets are suitable for doors 35mm to 45mm thick.

What sizes are the Alexander & Wilks flush pulls?

Alexander & Wilks gives the rectangular flush pull (AW911-100) as 100 x 45mm with a 14mm projection, and the round sliding door pull kit (AW994) as 60mm long and 48mm in diameter with an 11mm projection.

What is the difference between an edge pull and a finger edge pull?

The square and radius edge pulls are 70mm high plates set into the door edge. The round and square finger edge pulls are smaller pulls, around 25mm to 30mm long, that you grip with a fingertip.

Can I see Alexander & Wilks sliding door hardware before I buy?

Yes. Trade Door Handles is part of T.H. Wiggans Ironmongery, and our showrooms in Kendal and Carlisle are probably the largest architectural ironmongery showrooms in the North West of England. We have over 900 door handles on display in Kendal and over 300 in Carlisle, alongside window fittings and cabinet hardware, plus over 40 internal doors in Kendal and over 10 in Carlisle. We have supplied Carlisle Brass hardware since the 1980s. Find our showrooms or contact our team for help.

Can you supply the full Alexander & Wilks range?

Yes. We keep a selection of Alexander & Wilks products in stock, and our Carlisle showroom, trade counter and distribution centre is a five minute drive from where Alexander & Wilks products are stored, giving us direct access to the full range. For contract projects we work closely with the Alexander & Wilks team at Carlisle Brass, and our location means we can contact them directly and see them regularly. Send us your project schedule and we will check availability for you.

Compare /3

Loading...
Call Us