From The Anvil 35/45 Offset Euro Cylinders

35/45 Offset Euro Cylinders, 80mm Overall

A 35/45 offset Euro cylinder measures 35mm on one side of the centre fixing screw and 45mm on the other, 80mm overall. It is used where the lock is not central in the door thickness, so each side of the cylinder sits flush.

Choose a double Euro cylinder, or a thumbturn cylinder with the turn on the 35mm side (35T/45) or on the 45mm side (35/45T). Use them with From The Anvil Euro sash locks, Euro deadlocks and multi-point locks.

35/45 Offset Euro Cylinders in This Collection

Sizes: 30/30, 35/35, 40/40, 45/45 and 35/45 offset Euro cylinders
Shop by finish: black, brass, bronze and chrome Euro cylinders
Finish the door with matching Euro escutcheons

35/45 Offset Euro Cylinders: Questions

How do I measure a Euro cylinder?

Measure from the centre fixing screw hole to each end of the cylinder. A 35/35 cylinder measures 35mm each side of the screw, 70mm overall. The cylinder should sit flush with, or just proud of, the handle or Euro escutcheon on each side. If you are replacing a cylinder, measure the old one and match it.

What is a thumbturn cylinder?

A thumbturn cylinder has a key on the outside and a thumbturn on the inside, so no key is needed to lock the door from inside. A double Euro cylinder needs a key on both sides, and a half cylinder is keyed on one side only.

Trade Door Handles is part of T.H. Wiggans Ironmongery, an independent architectural ironmonger trading since 1976. We have supplied From The Anvil for decades, and both our T.H. Wiggans showroom in Kendal and our Trade Door Handles showroom in Carlisle have From The Anvil displays, so you can see the finishes before you order. Visit our showrooms or contact our team for help choosing.