From The Anvil Thumbturn Cylinders

Euro Thumbturn Cylinders: Key Outside, Turn Inside

A Euro thumbturn cylinder has a key on the outside and a thumbturn on the inside, so no key is needed to lock the door from inside. Use them with From The Anvil Euro sash locks, Euro deadlocks and multi-point locks.

They come in 30/30, 35/35, 40/40 and 45/45, plus 35T/45 and 35/45T offset sizes where the T shows the thumbturn side, in 5 pin and Black 6 pin TS007 versions, keyed alike or keyed to differ.

Thumbturn Cylinders in This Collection

Thumbturn Cylinders: Questions

What is a thumbturn cylinder?

A thumbturn cylinder has a key on the outside and a thumbturn on the inside, so no key is needed to lock the door from inside. A double Euro cylinder needs a key on both sides, and a half cylinder is keyed on one side only.

How do I measure a Euro cylinder?

Measure from the centre fixing screw hole to each end of the cylinder. A 35/35 cylinder measures 35mm each side of the screw, 70mm overall. The cylinder should sit flush with, or just proud of, the handle or Euro escutcheon on each side. If you are replacing a cylinder, measure the old one and match it.

Trade Door Handles is part of T.H. Wiggans Ironmongery, an independent architectural ironmonger trading since 1976. We have supplied From The Anvil for decades, and both our T.H. Wiggans showroom in Kendal and our Trade Door Handles showroom in Carlisle have From The Anvil displays, so you can see the finishes before you order. Visit our showrooms or contact our team for help choosing.
    View as
    Back to top

    Compare /3
    Call Us