From The Anvil DIN Euro Sash Locks

DIN Euro Sash Locks with 60mm Backset and 72mm Centres

A DIN Euro sash lock is made to the DIN pattern, with a 60mm backset and 72mm centres between the handle spindle and the cylinder, instead of the 47mm centres of a standard UK Euro profile sash lock. It combines a sprung latch, worked by the door handle, with a deadbolt worked by a Euro cylinder or thumbturn cylinder, sold separately.

From The Anvil makes its DIN Euro sash lock in 12 finishes. Most are CERTIFIRE approved (certificate CF5531), fire tested to FD-20/30/60 and performance tested against BS EN 12209, and the Black and Satin Stainless Steel versions are described as suitable for 30/60 minute fire doors.

DIN Euro Sash Locks in This Collection

• Fit with lever handles on rose and matching Euro escutcheons
• For the standard 47mm centre size, see the 2 1/2" and 3" Euro sash locks
• See all From The Anvil Euro profile locks

DIN Euro Sash Locks: Questions

What is a DIN lock?

A DIN lock is made to the DIN pattern, with a 72mm centre between the handle spindle and the cylinder rather than the 47mm centre of a standard UK Euro lock, and a 60mm backset. If you are replacing a lock, measure the backset and centres of the old one and match them.

What handles fit a DIN Euro sash lock?

Because the centres are 72mm, handles on a backplate made for 47mm centre Euro locks will not line up. Use lever handles on rose with separate Euro escutcheons, or a handle made for 72mm centres.

Trade Door Handles is part of T.H. Wiggans Ironmongery, an independent architectural ironmonger trading since 1976. We have supplied From The Anvil for decades, and both our T.H. Wiggans showroom in Kendal and our Trade Door Handles showroom in Carlisle have From The Anvil displays, so you can see the finishes before you order. Visit our showrooms or contact our team for help choosing.