Project Hardware Euro Lock Door Handles

Euro Profile Lever Handles for Cylinder Locks

Project Hardware euro lock door handles have a euro profile cut-out below the lever, at 48mm centres, for a euro cylinder and euro sash lock. They are used on timber front, back and side doors, offices and anywhere a cylinder lock is preferred to a traditional key. Available in the Avon, Kensington, Luca, Malvern and Milton designs.

Which Euro Lock Do I Need?

Fit a York euro profile sash lock at 48mm centres in 2.5 inch or 3 inch, then add a euro cylinder sized to the thickness of the door. Compare the wider M.Marcus euro lock door handles on backplate range.

Finishes

Euro lock handles are made in Polished Brass, Polished Chrome and Satin Chrome on every design, with Satin Nickel on the Luca, Malvern and Milton levers.

Specification

Every Project Hardware handle is made from zinc alloy with a plated finish, is supplied as a pair with a spindle and fixing screws, and carries a 10 year mechanism guarantee from M.Marcus. Handles are sold without the latch or lock, so remember to add the matching mechanism for each door.

Shop the Project Hardware Range

By design: Avon | Kensington | Malvern | Milton | Luca

By finish: Polished Brass | Polished Chrome | Satin Chrome | Satin Nickel

Or browse every handle in the full Project Hardware door handles range.

Why Buy Project Hardware from Trade Door Handles?

Trade Door Handles is run by T.H. Wiggans Ironmongery, an independent ironmonger trading since 1976 with showrooms in Kendal and Carlisle. Our trade counter team specifies door handles, latches and locks for joiners, builders, developers and homeowners every day, so we can help you count doors, pick the right function for each room and match the finish across the whole property. Project Hardware is made by M.Marcus, a British door hardware manufacturer founded in 1940. Not sure what you need? Contact us before you order and we will check it for you.

Frequently Asked Questions

What is a euro lock door handle?
A lever handle on a backplate with a cut-out for a euro profile cylinder, used with a euro sash lock.

What centres are Project Hardware euro handles?
48mm between the spindle and the cylinder, to match a standard euro profile sash lock.

Is the cylinder included?
No. The handles are supplied as a pair with a spindle and fixings. The euro sash lock and cylinder are bought separately.