Steel Line Stainless Steel Pull Handles

Stainless Steel Door Pull Handles from the Steel Line Range

Steel Line stainless steel pull handles are tubular D pulls and T bar pulls made by M.Marcus for entrance doors, office doors, shops and public buildings. There are 54 options in this collection, in satin and polished stainless steel, from 150mm cupboard and internal door pulls up to 2000mm T bar pulls for full height entrance doors.

Back to Back or Bolt Fix?

Back to back pull handles are fitted as a pair, one on each face of the door, joined through the door. Use them where people pull from both sides.
Bolt fix pull handles are a single pull bolted through from the other face. Pair them with a Steel Line push plate on the push side.
T bar pull handles are long pulls from 720mm to 2000mm for glazed and full height entrance doors.

Choosing a Length

As a guide, 150mm and 225mm pulls suit internal and lighter doors, 300mm and 425mm pulls suit most office and entrance doors, and 600mm pulls and T bars give more grip and presence on heavy or full height doors. The D pulls are made in 19mm and 22mm tube, with concealed fixing packs to suit each size in our Steel Line accessories.

Satin or Polished Stainless Steel?

Satin stainless steel has a brushed, low-glare finish that hides fingerprints and suits busy commercial doors. Polished stainless steel is bright and mirror-like, and suits contemporary homes, hotels and reception areas. Because the finish is the steel itself rather than a plated coating, it will not flake or wear through on high-traffic doors.

Shop the Steel Line Range

By finish: Satin Stainless Steel | Polished Stainless Steel

Or browse the full Steel Line stainless steel door hardware range.

Why Buy Steel Line from Trade Door Handles?

Trade Door Handles is run by T.H. Wiggans Ironmongery, an independent ironmonger trading since 1976 with showrooms in Kendal and Carlisle. Our trade counter team supplies stainless steel door furniture for offices, schools, surgeries, shops and homes, and can help you match pull handles, lever handles, hinges, signs and door stops in one finish across a whole project. Steel Line is made by M.Marcus, a British door hardware manufacturer founded in 1940. Not sure what you need? Contact us before you order and we will check it for you.

Frequently Asked Questions

What is the difference between back to back and bolt fix pull handles?
Back to back pulls are fitted as a pair, one on each side of the door. A bolt fix pull is a single handle bolted through from the other face, often with a push plate on that side.

What length pull handle do I need?
Most office and entrance doors suit a 300mm or 425mm pull. Use 150mm or 225mm on lighter internal doors and 600mm or a T bar on heavy or full height doors.

Are Steel Line pull handles stainless steel?
Yes. They are made from stainless steel in a satin or polished finish, so there is no plated coating to wear through.