Heritage Brass Cabinet Flush Pulls

Recessed Flush Handles for Sliding Cupboard and Wardrobe Doors

Heritage Brass flush pulls are recessed handles set into the face of a door, so nothing sticks out. They are designed mainly for room doors, but in the right circumstances they can also be used on cabinets, especially sliding cupboard and wardrobe doors. Because nothing projects, they let the doors pass each other without the handles catching, and give a clean, near handleless look on fitted furniture. There are 104 to choose from, in round, square and rectangular designs, all made from solid brass by M.Marcus. They are part of the Heritage Brass kitchen and cabinet hardware range.

Flush Pull Designs

Smaller round and square flush pulls suit cupboard and sideboard doors, while the longer 175mm, 197mm and 300mm rectangular flush pulls are easier to grip on tall sliding wardrobe doors. See all round flush pulls, square flush pulls, rectangular flush pulls and reeded flush pulls.

Check Your Door Thickness First

Flush pulls are made to suit room doors, which are usually thicker than cabinet doors. Before ordering, check that your cabinet or wardrobe door is thick enough to take the recess so the pull sits flush. As a guide, the round and square flush pulls list a plate thickness of 12mm to 13mm. Check the dimensions on each product page, and if you are not sure, send us your door thickness and we will check it for you.

Finishes

Choose antique brass, satin brass, polished brass, matt bronze, polished chrome, satin chrome, polished nickel or satin nickel, and matt black in the 197mm flush pull. Heritage Brass makes its door handles, window furniture and cabinet hardware in the same core finishes, so your flush pulls can match cupboard knobs, cabinet pull handles and edge pulls on the rest of your furniture.

Flush Pulls for Room Doors

Fitting a sliding or pocket door between rooms? See our sliding door flush pulls and the full Heritage Brass door flush pulls range, including edge pulls and privacy sets for pocket doors.

Flush Pull Questions

What is a cabinet flush pull?
A flush pull is a recessed handle set into the face of a door, so it sits flush with the surface. It gives a grip without anything sticking out.

Why use flush pulls on sliding cupboard doors?
Sliding cupboard and wardrobe doors pass in front of each other, so a projecting handle would catch. A flush pull sits inside the door, so the doors can slide past each other freely.

Will a flush pull fit my cabinet door?
Flush pulls are designed mainly for room doors, so check your cabinet door thickness before ordering. The pull fits into a recess cut into the face of the door, and the door must be thick enough for the pull to sit flush. The round and square flush pulls list a plate thickness of 12mm to 13mm.

Which size flush pull should I choose?
Round and square flush pulls suit smaller cupboard doors. On tall wardrobe doors, a longer rectangular flush pull of 175mm, 197mm or 300mm gives more room for your fingers.

Trusted UK Ironmongery Supplier Since 1976

Trade Door Handles is part of T.H. Wiggans Ironmongery, supplying architectural ironmongery since 1976, with Heritage Brass on display at our Kendal and Carlisle showrooms. Read our flush pulls guide, or contact us with a photo of your doors and we will help you choose.
    View as
    Back to top

    Compare /3
    Call Us