Heritage Brass - Satin Nickel Hinges

Satin Nickel Door Hinges by Heritage Brass

Heritage Brass satin nickel hinges are 17 solid brass butt hinges, parliament hinges and cabinet hinges by M.Marcus, finished to match Heritage Brass satin nickel door handles, door furniture and window furniture.

Hinge Types in Satin Nickel

  • Phosphor washered hinges: 3 x 2, 4 x 2 5/8 and 4 x 3 inch, plus double phosphor washered hinges in the same sizes, for smooth everyday use on internal doors.
  • Thrust bearing hinges with a steel pin: 4 x 3 and 4 x 4 inch, for heavier and busier doors.
  • Parliament hinges: 4 x 2 x 4, 4 x 3 x 5 and 4 x 4 x 6 inch. These project the door clear of deep architraves, skirting or panelling so it can open back fully.
  • Plain brass butt hinges: 4 x 2 3/8 inch, plus small brass hinges in 2 x 1 1/8, 2 1/2 x 1 3/8 and 3 x 1 5/8 inch for cupboards and small joinery.
  • Cabinet hinges: 1 inch and 1 1/2 inch, for boxes, cabinets and furniture.

Butt hinge sizes are given as length x open width. Most internal doors take 3 inch or 4 inch hinges, and heavier doors are usually hung on three 4 inch hinges. See every finish in Heritage Brass hinges, or browse internal door hinges and front and external door hinges.

The Lacquered Satin Nickel Finish

Satin nickel is a brushed nickel finish with a soft, low sheen and a slightly warmer grey tone than satin chrome, protected by a clear lacquer. All lacquered finishes will eventually break down over time, sooner on products exposed to the weather, particularly in coastal areas and polluted environments. Wipe off dirt and watermarks with a non-abrasive cloth, and do not use metal cleaners or aerosol sprays, as these will damage the lacquer. The life of the lacquer is beyond the manufacturer's control, so it cannot be guaranteed.

Match the Rest of the House

Hang doors on satin nickel hinges to match satin nickel door furniture and satin nickel door handles and knobs, with matching window furniture, accessories and kitchen and cabinet hardware. See the whole Heritage Brass satin nickel range. Need a stainless steel or fire door hinge? See Steel Line stainless steel hinges.

Satin Nickel Hinge Questions

What is a parliament hinge?
A parliament hinge has wide leaves that project the door away from the frame, so it clears deep architraves, skirting or panelling and can open back fully.

What size hinge do I need for an internal door?
Most internal doors take 3 inch or 4 inch butt hinges. Use 4 inch hinges, and three per door, for heavier solid doors.

What is the difference between washered and thrust bearing hinges?
Washered hinges have phosphor bronze washers between the knuckles for a smooth action on everyday doors. Thrust bearing hinges carry the door weight on a bearing and suit heavier, busier doors.

Will satin nickel hinges match my satin nickel door handles?
Yes. Heritage Brass uses the same satin nickel finish across its hinges, door handles, door furniture and window furniture.

Trusted UK Ironmongery Supplier Since 1976

Trade Door Handles is part of T.H. Wiggans Ironmongery, supplying architectural ironmongery since 1976, with the Heritage Brass range on display at our Kendal and Carlisle showrooms. Contact us with your door size and weight if you need help choosing hinges.

    View as

    Compare /3

    Loading...
    Call Us